Legacy Outback Limited AWD F4-2.5L DOHC (1998)
5) Set REPLACER No. 3 (C) to hole of REPLACER No. 1.
6) Rotate REPLACER No. 3 until REPLACER No. 2 pushes away valve lifter.
7) Insert tweezers into the notch of the valve lifter, and take the shim out.
NOTE: By using a magnet, the shim can be taken out without dropping it.
4) Measure thickness of shim with micrometer.
5) Select a shim of suitable thickness using measured valve clearance and shim thickness, using the table.
