Legacy Outback Limited AWD F4-2.5L DOHC (1998)
-
Remove clamp which secures pipe.
-
Remove bolts.
2. Installation
1) Install duty solenoid C and transfer valve body.
-
Install duty solenoid C and transfer valve body,
-
Install pipe and clamp.
Tightening torque: 8 ± 1 Nm (5.8 ± 0.7 ft. lbs.)
-
Install clutch drum.
2) Install extension.
-
Connect connector.
-
Tighten 11 bolts.
Tightening torque: 25 ± 2 Nm (18.1 ± 1.4 ft. lbs.)
-
Install gear select cable.
Tightening torque: 14 ± 4 Nm (10.1 ± 2.9 ft. lbs.)