Legacy Outback Ltd Sedan F4-2.5L SOHC (2000)
Tightening torque: 10 ± 2 Nm (1.0 ± 0.2 kg-m, 7.2 ± 1.4 ft. lbs.)
(8) Apply a coat of grease to oil seal lips and install oil seal (A) on camshaft using ST1 and ST2.
CAUTION: Use a new oil seal.
ST1 499597000 OIL SEAL GUIDE
ST2 499587500 OIL SEAL INSTALLER
(9) Install plug using ST. ST 499587100 OIL SEAL INSTALLER
(10) Install oil level gauge guide.
(11) Install camshaft position sensor support.
2. CAMSHAFT (RH)
a) Apply a coat of engine oil to camshaft journals and install camshaft (RH).
b) Install camshaft cap.
(1) Apply liquid gasket on the around of cam shaft cap.
Liquid gasket: THREE BOND 1280B (Part No. 0029431130)
