Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
2. Confirm the matching mark (A) of sunroof bracket link.
3. Install sunroof motor.
4. After installing the motor, reconfirm the matching marks of motor side and sunroof bracket link side.
5. Connect sunroof motor harness connector and then connect battery ground cable.
6. Operate the sunroof switch, and check the sunroof stop position.
7. Move sunroof to completely closed position and install sunroof lid.
8. Check the sunroof operation with the procedure as shown in the figure.
9. Install trims in the reverse order of removal.