Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
17. Remove left-hand belt cover No. 2.
18. Remove tensioner bracket.
19. Disconnect heater hose from water pump.
20. Remove water pump.
B: INSTALLATION
1. Install water pump onto left-hand cylinder head.
CAUTION:
^
Replace gasket with a new one.
^
When installing water pump, tighten bolts in two stages in alphabetical sequence as shown in figure.
Tightening torque:
First: 12 Nm (1.2 kgf-m, 8.7 ft. lbs.)
Second: 12 Nm (1.2 kgf-m, 8.7 ft. lbs.)
