Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
20. Connect connectors to throttle position sensor (A), idle air control solenoid valve (B) and intake manifold pressure sensor (C).
21. Connect air by-pass hose (D) to idle air control solenoid valve.
22. Connect air by-pass hose (E) to intake manifold.
23. Install ignition coil and ignitor assembly.
24. Connect connector to ignition coil and ignitor assembly.
25. Install engine ground terminal to intake manifold.
AT Vehicles
DISASSEMBLY
1. Disconnect engine ground terminal from intake manifold.