Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
10. Tighten bolt which install injector pipe on intake manifold.
11. Install purge control solenoid valve.
12. Connect hoses to purge control solenoid valve.
CAUTION: Carefully connect the evaporation hoses.
13. Install engine harness onto intake manifold.
14. Connect connectors to fuel injectors and purge control solenoid valve.
15. Hold engine harness by harness band (*)
NOTE: Do not use harness band on harnesses where they are supposed to be protected by the fuel pipe protector.