subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Filler Hose|Removal and Installation|Page 2723 > < Fuel Filler Hose|Removal and Installation|Page 2721
Page 7
background image

24. Disconnect evaporation hose (O) from fuel filler pipe.

25. Remove bolt which holds fuel filler pipe to body.
26. Remove fuel filler pipe to under side of the vehicle.

INSTALLATION

1. Hold fuel filler flap open.

2. Set fuel saucer (A) with rubber packing (C) and insert fuel filler pipe into hole from the inner side of apron.
3. Align holes in fuel filler pipe neck and set cup (B), and tighten screws.

NOTE:  If edges of rubber packing are folded toward the inside, straighten it with a screwdriver.

Fuel Filler Hose|Removal and Installation|Page 2723 > < Fuel Filler Hose|Removal and Installation|Page 2721