Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Throttle Cable/Linkage: Service and Repair
A: REMOVAL
1. Remove accelerator pedal. Refer to Accelerator Pedal; Service and Repair.
2. Separate accelerator cable and accelerator pedal.
B: INSTALLATION
1. Install in the reverse order of removal.
CAUTION:
^
If cable clamp is damaged, replace it with a new one.
^
Never fail to cover outer cable end with boot.
^
Be careful not to kink accelerator cable.
^
Do not apply grease to the throttle cable on the engine side.
2. Adjustment after pedal installation.