subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Impact Sensor|Service and Repair > < Front Sub Sensor Harness|Page 5400
Page 1
background image

Impact Sensor: Testing and Inspection
Inspection Locations After A Collision

INSPECTION

If the vehicle is involved in a collision on any side, even if it is a slight collision, be sure to check the following system parts.

FRONT SUB SENSOR

If the front section of vehicle as shown in the figure is damaged:
Check for the following, and replace damaged parts with new parts.

-

Front sub sensor is cracked or deformed.

-

Mounting bracket is cracked or deformed.

-

Connector is scratched or cracked.

-

Airbag is deployed.

FRONT SUB SENSOR HARNESS

Check for the following, and replace damaged parts with new parts.

-

Harness is open, lead wire is exposed, and corrugated tube is noticeably cracked.

-

Connector is scratched or cracked.

SIDE AIRBAG SENSOR

If the side section of vehicle as shown in the figure is damaged:
Check for the following, and replace damaged parts with new parts.

-

Side airbag sensor is cracked or deformed.

-

Mounting bracket is cracked or deformed.

-

Connector is scratched or cracked.

-

Side airbag is deployed (operating side)

SIDE AIRBAG SENSOR HARNESS

Check for the following, and replace damaged parts with new parts.

-

Harness is open, lead wire is exposed, and corrugated tube is noticeably cracked.

-

Connector is scratched or cracked.

Impact Sensor|Service and Repair > < Front Sub Sensor Harness|Page 5400