Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Malfunction Lamp / Indicator: Testing and Inspection
Airbag Warning Light Remains On
DIAGNOSIS:
-
Airbag warning light is faulty.
-
Airbag control module to airbag warning light circuit is shorted or open.
-
Grounding circuit is faulty.
-
Airbag control module is faulty.
-
(AB1) and (B31) are not connected properly.
-
(AB6) is not connected properly to airbag control module.
CAUTION:
-
Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the ground cable from the battery, and wait more than 20
seconds before starting to work.
-
Before replacing the airbag module, roll connector, control module, and sensor, reconnect each part and confirm that the warning light operates
properly.
-
When inspecting the airbag main harness, disconnect the airbag module connector of the driver and passenger seats for safety reasons.
Wiring Diagram
WIRING DIAGRAM
