Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Seat Belt Tensioner: Service and Repair
Disconnection and Connection
OPERATION
DRIVER'S AIRBAG, SIDE AIRBAG AND PRETENSIONER
How to disconnect:
1. Push lock arm (A).
2. With lock arm (A) pushed in, move slide lock (B) in the direction of the arrow.
3. With slide lock (B) pulled, remove lock arm (A) to its original position, and then pull in the direction of the arrow and separate the connector.
CAUTION: When pulling, be sure to hold onto the connector and not the wire.
How to connect:
Holding the connector, and push it in carefully until a connecting sound is heard.
CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
