Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
CAUTION:
^
When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn adjusting bolt head until toe-in is at the specification.
NOTE: When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 3 mm (0.12 inch).
3. Tighten self-locking nut.
Tightening torque: 120 Mm (12.2 kgf-cm, 88 ft. lbs.)
THRUST ANGLE
Inspection
1. Position vehicle on a level surface.
2. Move vehicle 3 to 4 meters directly forward.
3. Determine locus of both front and rear axles.
