Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
6. Secure valve assembly to ST1 and ST2.
7. Put ST3 over pinion, and insert oil seal, then force-fit oil seal into housing using ST4.
ST1 926370000 INSTALLER A
ST2 34099FA100 STAND BASE
ST3 926360000 INSTALLER A
ST4 927620000 INSTALLER B
NOTE:
^
Apply specified power steering fluid to oil seal and ST3, being careful not to damage oil seal lip.
^
Push oil seal until ST3 contacts housing end face.
8. Remove ST3, and fit backing washer.
9. Force-fit ball bearing using ST3.
ST1 926370000 INSTALLER A
ST2 34099FAIOO STAND BASE
ST3 927640000 INSTALLER B
NOTE: Be careful not to tilt ball bearing during installation.
10. Install snap ring using snap ring pliers.
NOTE: Rotate snap ring to check for proper installation.
Rack Housing Oil Seal
