Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
1. Install the oil cooler outlet and inlet pipes.
CAUTION: Be sure to use a new aluminum washer.
Tightening torque:
T1: 44 Nm (4.5 kgf-m, 32.5 ft. lbs.)
T2: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
2. Install ATF cooler pipe to frame.
3. Connect ATF cooler hose to transmission.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
