Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Axle Bearing: Service and Repair
Disassembly and Assembly
C: DISASSEMBLY
1. Using ST1, support housing and hub securely.
2. Attach ST2 to housing and drive hub out.
ST1 927060000 HUB REMOVER
ST2 927080000 HUB STAND
If inner bearing race remains in the hub, remove it with a suitable tool (commercially available).
CAUTION:
^
Be careful not to scratch polished area of hub.
^
Be sure to install inner race on the side of outer race from which it was removed.
3. Remove disc cover from housing.
4. Using a standard screwdriver, remove outer and inner oil seals.
CAUTION: Do not use old oil seals.
