Legacy Outback Wagon F4-2.5L SOHC (2000)
^
Do not remove oil seal unless necessary.
^
Do not scratch journal surface when removing oil seal.
3. CAMSHAFT (RH)
a. Remove camshaft cap.
(1) Remove bolts (a) through (b) in alphabetical sequence.
(2) Equally loosen bolts (c) through (j) all the way in alphabetical sequence.
(3) Remove bolts (k) through (p) in alphabetical sequence using ST. ST 499497000 TORX PLUS
(4) Remove camshaft cap.
a) Remove camshaft (RH).
b) Remove oil seal.
c) Remove plug from rear side of camshaft (RH).
CAUTION:
^
Do not remove oil seal unless necessary.
^
Do not scratch journal surface when removing oil seal.
