Legacy Outback Wagon F4-2.5L SOHC (2000)
NOTE: Apply a coat of 3 mm (0.12 inch) diameter liquid gasket along edge of cam cap mating surface.
(2) Temporarily tighten bolts (g) through (j) in alphabetical sequence.
(3) Install valve rocker assembly.
(4) Tighten bolts (a) through (h) in alphabetical sequence.
Tightening torque: 25 ± 2 Nm (2.5 ± 0.2 kg-m, 18.1 ± 1.4 ft. lbs.)
(5) Tighten TORX bolts (i) through (n) in alphabetical sequence using ST.