Legacy Outback Wagon F4-2.5L SOHC (2000)
Air Door: Description and Operation
Intake Door Control
Intake Door Control
Intake Door Control
Intake door motor is located on the upper part of the intake unit. It opens and closes the intake door with a rod and a link. When the RECIRC switch is
set to ON (the RECIRC indicator light), the ground line of the intake door motor is switched to terminal 2 from terminal 1, and the motor starts to rotate
because the position switch contacts built into it are set to the current flow position . The contacts turn along with the motor. When they reach the
non-contact flow position, the motor will stop. The motor always turns in the same direction. When the RECIRC switch is set to OFF (the RECIRC
indicator does not light), follow the same operation.
