Legacy Outback Wagon F4-2.5L SOHC (2000)
Evaporator Case: Service and Repair
Removal and Installation
Intake Unit With Evaporator
1. Disconnect battery negative terminal.
2. Discharge refrigerant using refrigerant recovery system.
3. Remove bolt then disconnect discharge pipe and suction pipe.
4. Remove glove box.
5. Disconnect the harness connector from intake unit.
6. Disconnect drain hose.
7. Remove intake unit mounting bolt and nut.
8. Install the intake unit in the reverse order of removal.
9. Charge refrigerant.