Legacy Outback Wagon F4-2.5L SOHC (2000)
Center Mounted Brake Lamp: Service and Repair
HIGH-MOUNTED STOP LIGHT (SEDAN BODY WITHOUT REAR SPOILER)
1. Disconnect connector of high-mounted stop light from body harness.
2. Remove bolts, then detach high-mounted stop light assembly.
3. Installation is in the reverse order of removal.
HIGH-MOUNTED STOP LIGHT (SEDAN BODY WITH REAR SPOILER)
1. Remove three screws and then detach high mounted stop light assembly while disconnecting connector.
2. Installation is in the reverse order of removal.
HIGH-MOUNTED STOP LIGHT (WAGON BODY)
1. Remove cap (a) by prying on the edge with a screwdriver.
2. Remove screws (b) and then detach cover (c).
3. Remove screws (d) and then detach high-mounted stop light while disconnecting connector.
4. Installation is in the reverse order of removal.
