Legacy Outback Wagon F4-2.5L SOHC (2000)
1. Installation of timing belt
1. Turn camshaft sprocket No.2 using STI, and turn camshaft sprocket No. 1 using ST2 so that their alignment marks come to top positions.
ST1 499207100 CAMSHAFT SPROCKET WRENCH
ST2 499207400 CAMSHAFT SPROCKET WRENCH
2. While aligning alignment mark on timing belt with marks on sprockets, position timing belt properly.
CAUTION: Ensure belt's rotating direction is correct.
2. Install belt idler No.2.
Tightening torque: ............................................................................................................................ 39+/-4 Nm (4.0+/-O.4 kg-m, 28.9+/-2.9 ft-lb)
3. Install belt idler (No.2).
Tightening torque: ............................................................................................................................ 39+/-4 Nm (4.0+/-O.4 kg-m, 28.9+/-2.9 ft-lb)
4. After ensuring that the marks on timing belt and camshaft sprockets are aligned, remove stopper pin from belt tensioner adjuster.
