Legacy Outback Wagon F4-2.5L SOHC (2000)
Measure resistance between connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 1 M ohms?
YES:
Go to step 5R7.
NO:
Replace side airbag harness (LH).
5R7: SIDE AIRBAG HARNESS (LH) INSPECTION
Measure resistance between connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 1 M ohms?
YES:
Go to step 5R8.
NO:
Replace side airbag harness (LH).
5R8: SIDE AIRBAG HARNESS (LH) INSPECTION
Measure resistance between connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 1 M ohms?
YES:
Replace side airbag sensor (LH).
