Legacy Outback Wagon F4-2.5L SOHC (2000)
4. Measure resistance across test harness I or I2 connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5W3.
NO:
Replace side airbag harness.
5W3: SIDE AIRBAG HARNESS OPEN CIRCUIT INSPECTION
Measure resistance across test harness I or I2 connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5W4.
NO:
Replace side airbag harness.
5W4: SIDE AIRBAG HARNESS SHORTED CIRCUIT INSPECTION
Measure resistance between test harness or I2 connector (3I) terminal.
CHECK: Is the resistance more than 1 M ohms?
YES:
Go to step 5W5.