Legacy Outback Wagon F4-2.5L SOHC (2000)
1. Check the bearing for smooth movement by applying force in the radial direction.
Radial direction stroke: 1.4 mm (0.055 inch)
2. Check the bearing for smooth rotation by applying pressure in the thrust direction.
3. Check wear and damage of bearing case surface contacting with lever.
Release Lever
1. Check lever pivot portion and the point of contact with release bearing case for wear.
C: INSTALLATION
CAUTION: Before or during assembling, lubricate the following points with a light coat of grease.
^
Contact surface of lever and pivot
^
Contact surface of lever and bearing
^
Transmission Main shaft spline (Use grease containing molybdenum disulfide.)
^
Contact surface of lever and operating cylinder
