Legacy Outback Wagon F4-2.5L SOHC (2000)
Transmission gear oil
Recommended oil
2. FRONT DIFFERENTIAL (AUTOMATIC TRANSMISSION)
1. Drain differential gear oil by removing drain plug after allowing the engine to cool for 3 to 4 hours.
CAUTION: Before starting work, cool off the engine well.
2. Reinstall drain plug after draining differential gear oil and tighten it to the specified torque.
Tightening torque:
44 ± 3 Nm
(4.5 ± 0.3 kg-m, 33 ± 2.2 ft.lb)
CAUTION:
-
Be sure to place a gasket between the transmission case and drain plug.
-
Replace the gasket with a new one.
3. Fill differential gear oil through the oil level gauge hole up to the upper point of level gauge.
Differential gear oil capacity:
1.1 - 1.3 l
(1.2 - 1.4 US qt, 1.0 - 1.1 Imp qt)