subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

RKE Installation|Page 5160 > < RKE Installation|Page 5158
Page 1
background image

Keyless Entry Module: Service and Repair
RKE Programming

SYSTEM OPERATION

1. Parking lights will flash when the vehicle battery is disconnected and reconnected. To stop lights from flashing, either:

-

Press remote transmitter UNLOCK button once.

-

Turn ignition to the "ON" or "RUN" position and press programming button for one second (see location below).

2. The vehicle courtesy light and DOOR AJAR indicator will illuminate for 60 seconds when the ignition is turned off, or until the doors are locked

with the remote transmitter.

3. The instrument panel lights will flash when the parking lights flash.
4. Your SUBARU keyless Entry System is equipped with two remote transmitters.

Programming Buttons Location

RKE Installation|Page 5160 > < RKE Installation|Page 5158