Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
While the engine is idling, depress the brake pedal with a 490 N (50 kg, 110 lbs.) load and measure the distance between the brake pedal and
steering wheel. With the brake pedal released, measure the distance between the pedal and steering wheel again. The difference between the two
measurements must be more than specified.
Specified pedal stroke:
Without ABS 90 mm (3.54 inch)
With ABS 95 mm (3.74 inch)
When depressing brake pedal with a 490 N (50 kg, 110 lbs.) load.
1. Models without ABS
If the distance is more than specifications, there is a possibility that air is in the brake line. Bleed air from the brake line.
2. Models with ABS
If the distance os more than specifications, there is a possibility air is in the inside of the hydraulic unit. Therefore, air must be bled from
the inside of the hydraulic unit to the brake pipes in accordance with the bleeding sequence control.
8. Add brake fluid to the required level (MAX. level) of reserve tank.
9. As a final step, test run the vehicle at low speed and apply brakes relatively hard 2 to 3 times to ensure that brakes provide normal braking action
on all four wheels without dragging and uneven braking.
