Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
1) Apply fluid packing to the mating suface of #1 and #3 cylinder block, and position it on #2 and #4 cylinder block.
Fluid packing: Three Bond 1215 or equivalent
Caution: Do not allow fluid packing to jut into O-ring grooves, oil passages, bearing grooves, etc.
Fig. 38 Crankcase 10 MM Bolt Tightening Sequence
2) Temporarily tighten 10 mm cylinder block connecting bolts in numerical order shown in image.
3) Tighten 10 mm cylinder block connecting bolts in numerical order.
Tightening Torque: 47 ± 3 Nm(4.8 ± 0.3 kg-m, 34.7 ± 2.2 ft. lbs)
