Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
Heater Core Case: Service and Repair
Heater Unit
REMOVAL AND INSTALLATION
1. Disconnect GND cable from battery.
2. Remove heater hoses (inlet, outlet) in engine compartment.
NOTE: Drain as much coolant from heater unit as possible, and plug disconnected hose with cloth.
3. Remove instrument panel.
4. Remove steering support beam.
5. Remove evaporator. (With A/C model)
6. Remove heater unit.
7. Installation is in the reverse order of removal.
Fitted length of heater hose over pipe:
25 - 30 mm (0.98- 1.18 in)
8. Pour coolant.
