Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
B - A = Toe-in.
Rear Wheel Toe-In Adjustment
1. Loosen self-locking nut on inner side of rear lateral link.
CAUTION:
^
When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn adjusting bolt head until toe-in is at the specification.
NOTE: When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 3 mm (0.12 inch).
3. Tighten self-locking nut.
Tightening torque: 98 ± 15 Nm (72 ± 11 ft. lbs.).
Thrust Angle Inspection
