Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
44. Check the installed depth of the hub with the following procedure. Measure through the provided slot on J45697-1. (Remove the washer if
necessary and reinstall nut) Using an appropriate depth gauge measure from the top of J45697-1 to the top flat edge of the wheel bearing. This will
represent "A".
Measure again to the top flat of the hub. This will represent "B".
Use the following formula: B-A=C "C" should equal 2.0 +/- 0.3 mm, the correct installed depth of the wheel bearing hub.
