Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
5) Remove knock sensor from cylinder block.
INSTALLATION
1) Install knock sensor to cylinder block.
Tightening torque: 23.5 ± 2.9 Nm (2.4 ± 0.3kg-m, 17.3 ± 2.1 ft. lb)
NOTE: The extraction area of the knock sensor cord must be positioned at a 45° angle relative to the engine rear.
2) Connect knock sensor connector.
NOTE: The knock sensor cord must pass between the engine harness and engine coolant hose.