subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 5001 > < Symptom Related Diagnostic Procedures|Page 4999
Page 10
background image

5B26: FRONT SUB SENSOR (LH) INSPECTION

1. Connect test harness H connector (2H) and front sub sensor (LH).

2. Measure resistance between test harness H connector (3H) terminal.

CHECK: Is the resistance between 750 Ohms and 1 K Ohm?

YES:

Go to step 5B27.

NO:

Replace front sub sensor (LH).

5B27: FRONT SUB SENSOR (LH) INSPECTION

Measure resistance across test harness H connector (3H) terminal and chassis ground.

CHECK: Is the resistance more than 10 K Ohms?

YES:

Go to step 5B28.

NO:

Replace front sub sensor (LH).

5B28: FRONT SUB SENSOR (LH) INSPECTION

Measure resistance across test harness H connector (3H) terminal and chassis ground.

CHECK: Is the resistance more than 10 K Ohms?

YES:

Perform clear memory.

NO:

Replace front sub sensor (LH).

16  Side Airbag Sensor (RH) Is Faulty

Symptom Related Diagnostic Procedures|Page 5001 > < Symptom Related Diagnostic Procedures|Page 4999