Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
NO:
Go to step 5B6.
5B6: FRONT SUB SENSOR (LH) AND FRONT SUB SENSOR HARNESS (LH) INSPECTION
Measure resistance across test harness E connector (3E) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Replace airbag control module.
NO:
Go to step 5B7.
5B7: AIRBAG MAIN HARNESS INSPECTION
1. Disconnect connector (AB14) and (AB15), then connect test harness F connector (2F) and connector (AB14).
2. Measure resistance between test harness E connector (3E) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5B8.
NO:
Replace airbag main harness.
5B8: AIRBAG MAIN HARNESS INSPECTION
