Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
Measure resistance across test harness H connector (3H) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Go to step 5B18.
NO:
Replace front sub sensor (RH).
5B18: AIRBAG MAIN HARNESS INSPECTION
1. Disconnect connector (AB11) and (AB12), then connect test harness F connector (2F) and connector (AB11).
2. Measure resistance between test harness E connector (3E) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5B19.
NO:
Replace airbag main harness.
5B19: AIRBAG MAIN HARNESS INSPECTION
Measure resistance between test harness E connector (3E) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5B20.
NO:
Replace airbag main harness.
