subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 5122 > < Symptom Related Diagnostic Procedures|Page 5120
Page 13
background image

YES:

Go to step 5N6.

NO:

Replace airbag main harness. 

5N6: AIRBAG MAIN HARNESS INSPECTION

Measure resistance between connector (3E) terminal and chassis ground.

CHECK: Is the resistance more than 1 M Ohm?

YES:

Replace side airbag sensor (LH).

NO:

Replace airbag main harness.

26  Side Airbag Sensor (LH) Is Faulty

DIAGNOSIS:

-

Side airbag sensor (LH) is faulty.

-

Side airbag sensor is different.

CAUTION:  Before performing diagnostics on airbag system, turn ignition switch OFF, disconnect battery ground cable and then wait at least 20
seconds.

5O1: CHECK IF TROUBLE CODE 26 IS INDICATED.

Confirm flashing trouble code according to "BASIC DIAGNOSTICS PROCEDURE". 

CHECK: Is airbag warning light trouble code 26 indicated?

YES:

Replace side airbag sensor (LH). 

NO:

Perform clear memory.

Symptom Related Diagnostic Procedures|Page 5122 > < Symptom Related Diagnostic Procedures|Page 5120