Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
CAUTION:
-
When disconnecting pipe C-D, use two wrenches to prevent deformities.
-
Be careful to keep pipe connections free from foreign matter.
6) Remove bolt A.
Disconnect pipe C from oil pump. Disconnect pipe D from oil tank.
CAUTION:
-
Do not allow fluid from the hose end to come into contact with pulley belt.
-
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
2. RHD MODEL
1) Disconnect battery negative terminal.
2) Lift vehicle and remove jack-up plate.
3) Remove one pipe joint at the center of gearbox, and connect vinyl hose to pipe and joint. Discharge fluid by turning steering wheel fully clockwise
and counterclockwise. Discharge fluid similarly from the other pipe.
CAUTION: Improper removal and installation of parts often causes fluid leak trouble. To prevent this, clean the surrounding portions before
disassembly and reassembly, and pay special attention to keep dirt and other foreign matter from mating surfaces.
