Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
(2) Remove four bolts which secure rear cover.
(3) Remove the following parts from front casing.
(1) Seal washer
(2) Knock pin 2 ea.
(3) Cam ring
(4) Rotor
(5) Vane 10 ea.
(6) Side plate
(7) O-ring 2 ea.
CAUTION: Discard old seal washer; replace with a new one.
2. Control valve: Slightly loosen outlet connector, and remove connector. Remove the following parts for pump casing.
-
Spool valve assembly
-
Flow control spring
-
Connector
-
O-ring
3. Shaft
(1) Remove snap ring from front casing.
