subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steering Gear Pinion Valve|Diagrams|Page 4479 > < Steering Gear Pinion Valve|Diagrams
Page 1
background image

Steering Gear Pinion Valve: Service and Repair

A: CHECKING OIL LEAKING POINTS 

1. Oil Leaking Points 
1. If leak point is other than a, b, c, or d, perform check step 5 in Leak Check before dismounting gearbox from vehicle. If gearbox is dismounted

without confirming where the leak is, it must be mounted again to locate the leak point. 

2. Even if the location of the leak can be easily found by observing the leaking condition, it is necessary to thoroughly remove the oil from the

suspected portion and turn the steering wheel from lock to lock about 30 to 40 times with engine running, then make comparison of the suspected
portion between immediately after and several hours after this operation.

3. Before starting oil leak repair work, be sure to clean the gearbox, hoses, pipes, and surrounding parts. After completing repair work, clean these

areas again.

2. Oil Leak Check Procedure and Replacement Parts 

NOTE:  Parts requiring replacement are described in the smallest unit of spare parts including damaged parts and spare parts damaged. In actual

Steering Gear Pinion Valve|Diagrams|Page 4479 > < Steering Gear Pinion Valve|Diagrams