Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
25. Set the bearing assembly into the bearing housing.
26. Assemble the tools for wheel bearing installation. Place a washer on the bolt followed by OTC 311888 (open end facing toward the wheel bearing
housing). Place another washer on the bolt followed by J45697-9. Apply the included grease to the puller bolt.
Note: All three included washers are the same thickness.
27. The J45697-1 larger diameter surface will face the wheel bearing housing on the inner side after the puller bolt has been inserted into the bearing
housing.
