Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
5) Remove rear crossmember.
-
Support transmission using a transmission jack and raise slightly.
-
Remove bolts and nuts as shown in Figure.
6) Remove vehicle speed sensor 1.
7) Remove extension and gasket.
-
Remove gear select cable nut.
-
Move gear select cable so that extension bolts can be removed.
-
Remove bolts.
-
Remove extension and disconnect duty solenoid C connector.
CAUTION: Do not force extension back before disconnecting solenoid connector. Otherwise, harness may be damaged.
NOTE: Use a container to catch oil flowing from extension.
