subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shift Solenoid 1|Page 3287 > < Shift Solenoid 1|Page 3285
Page 4
background image

7) Add ATF and check level.

DUTY SOLENOID C AND TRANSFER VALVE BODY 

1. Removal

1) Remove pitching stopper.

2) Raise vehicle and drain ATF.

3) Remove front exhaust pipe.

Disconnect oxygen sensor connector, and remove exhaust pipe.

4) Remove propeller shaft.

NOTE:  Before removing propeller shaft, scribe matching marks on propeller shaft and rear differential coupling.

Shift Solenoid 1|Page 3287 > < Shift Solenoid 1|Page 3285