Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
1. Assemble 28099PA040-1, 208099PA040-2 (With short adapter sleeve and shorter bolt) 28099PA040-5, and J5356-4 puller bolt onto the front
hub. Insert 28099PA040-6 into the bearing assembly. Turn puller bolt to remove bearing. Remove tone wheel if equipped.
2. Place the hub into the press with press plates that will provide support to the under side of the inner race of the tapered roller bearing. Insert
28099PA040-6 onto the top of the hub. Apply pressure with the press until the hub is removed. Align press plate bolts so they are supported along
the length of the bolt.
