Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
6) Remove control valve body and two brackets. Remove 6 long bolts (Black) and 11 short bolts (Yellow).
NOTE:
-
Be careful - because oil flows from valve body.
-
Be careful not to damage accumulator spring at rear of control valve.
7) Remove shift solenoids 1, 2, and 3, and duty solenoid A.
a length : 16 mm (0.63 inch)
b length : 27 mm (1.06 inch)
8) Remove duty solenoid B.
2. Installation
1) Install duty solenoid B (lock-up).
Tightening torque: 11.3 ± 1.5 Nm (8.3 ± 1.1 ft. lbs.)
