Legacy Wagon 4WD F4-2.2L SOHC (1991)
Transmission Position Switch/Sensor: Adjustments
1. Loosen the three inhibitor switch securing bolts.
2. Shift the select lever to the N range.
3. Insert Stopper Pin (499267300) as vertical as possible into the holes in the inhibitor switch lever and switch body.
4. Torque the three inhibitor switch bolts to 3 - 4 Nm (2.2 - 2.9 ft.lbs).
5. Test the inhibitor switch, if it still is not within specification replace.
