Loyale Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC (1989)
_2wd/f4-1781cc_1.8l_sohc/Page-964001.png)
Band: Adjustments
Three-Speed Automatic Transaxle
If engine speed increases abruptly on 2-3 shift or if there is a delay of more than .7 second on a 3-2 kickdown, excessive clearance between the reverse
clutch drum and band may exist and the adjusting screw should be rotated clockwise. If there is a braking action on 2-3 shift or if shock on a 1-2 shift is
unusually light, excessive small brake band clearance may exist and the adjusting screw should be rotated counterclockwise. Adjust brake band as
follows.
1.
Using socket 398603610, to hold adjusting screw in place, loosen locknut.
2.
Loosen or tighten the adjusting screw within 3/4 turn, as necessary to properly adjust the band, then torque locknut to 19-21 ft. lbs.
If slipping occurs on a 2-3 shift, excessive small brake band clearance may exist. If transmission shifts directly from 1st to 3rd, excessive large brake
band clearance may exist. Adjust brake band as follows.
1.
Using socket 398603610, to hold adjusting screw in place, loosen locknut.
2.
Torque adjusting screw to 6.5 ft. lbs., then back off adjusting screw 2 turns. Torque locknut to 19-21 ft. lbs.
