Loyale Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC Turbo (1990)
_2wd/f4-1781cc_1.8l_sohc_turbo/Page-329001.png)
Alignment: Technical Service Bulletins
Wheel Alignment Specifications
NUMBER: 05-28-92
DATE: 03-13-92
APPLICABILITY
85 MY TO PRESENT L-SERIES AND LOYALE
SUBJECT:
WHEEL ALIGNMENT SPECIFICATIONS
Use the revised alignment information included in this bulletin to correct Section 4-1 Suspension "Wheel Alignment" of the applicable Service Manual.
SIGNIFICANT CHANGES
I.
Front and rear wheel toe angles are calculated in total toe which is the sum of both right and left wheel angles per axle. See Figure 1 for
measurement points.
THRUST ANGLE
II.
Thrust angle measurements for rear wheel tracking is now included. Thrust angle is defined as the path that the rear wheels will take, which is
geometrically aligned with the body centerline.
NOTE:
DUE TO MINOR ACCIDENTS, HITTING CURBS OR POTHOLES AND OTHER RELATED ROAD HAZARDS, ONE OF THE REAR WHEELS
MAY CHANGE POSITION. THIS DIRECTLY AFFECTS THE THRUST ANGLE BY PREVENTING THE REAR WHEELS FROM TRACKING
BEHIND THE FRONT WHEELS. THIS CAN RESULT IN WHEEL SCRUBBING WHICH CAN CAUSE: UNUSUAL AND ACCELERATED
