Loyale Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC Turbo (1990)
_2wd/f4-1781cc_1.8l_sohc_turbo/Page-365005.png)
INSTALLATION
1. Install belt cover seal LH No. 3 to cylinder block.
2. Install belt cover LH seal, belt cover No.4 LH seal, and belt cover mount to belt cover RR, then install to cylinder block.
Tightening torque:
4.4 - 5.4 N-m (0.45 - 0.55 kg-m, 3.3 - 4.0 ft-lb).
3. Install belt cover No. 2 LH seal and belt cover mounts to belt cover No. 2 LH, then install to cylinder head and camshaft case.
Tightening torque:
4.4 - 5.4 N-m (0.45 - 0.55 kg-m, 3.3 - 4.0 ft-lb).
4. Install belt cover RH seal, belt cover No. 2 RH seal, and belt cover mounts to belt cover No. 2 RH, then install to cylinder head and camshaft case.
Tightening torque:
4.4 - 5.4 N-m (0.45 - 0.55 kg-m, 3.3 - 4.0 ft-lb).
5. Install camshaft sprockets to right and left camshafts. To lock camshaft, use CAMSHAFT SPROCKET WRENCH.
NOTE: Tighten bolts gradually in two or three steps until the specified torque is attained.
Tightening torque:
9.1 - 10.5 N-m (0.93-1.07 kg-m, 6.7 - 7.7 ft-lb).
6. Installing tensioner
(a) Attach tensioner spring to tensioner, then install to cylinder block RH. Tighten bolts temporarily by hand.
(b) Attach tensioner spring to bolt, tighten bolt (A), and then loosen 1/2 turn.
(c) Push down tensioner until it stops, then tighten temporarily bolt (B).
7. Installing tensioner No. 2
(a) Attach tensioner spring to tensioner No. 2, then install the tensioner No. 2 to cylinder block LH. Tighten bolts temporarily by hand.
(b) Attach tensioner spring to bolt, tighten bolt (C) then loosen 1/2 turn.
