Loyale Wagon 2WD F4-1781cc 1.8L SOHC (1989)
2.
Measure depth (L) of rotor housing bore in cylinder block.
3.
Calculate side clearance (C) using the following equation: C = L - (H1 + H2)
4.
If side clearance value (C) is larger than "Limit" shown below, replace pump inner and outer rotors with the suitable ones selected from the
following specifications.
SPECIFICATIONS:
Side Clearance: C
Standard ................................................................................................................................................................. 0.0020 - 0.0063 in. (0.05 - 0.16 mm)
Limit ............................................................................................................................................................................................... 0.0071 in. (0.18 mm)
Height of case projection: H1 ...................................................................................................................................... 0.3138 - 0.3150 in. (7.97 - 8.00 mm)
Depth of rotor housing: L ........................................................................................................................................ 0.8646 - 0.8677 in. (21.96 - 22.04 mm)
